 | support home  broadband broadband guides current page |
Connect the Billion 7404VGP/7300G/5200G or Open824RLW to the power, phone line and network to your PC. Turn it on and wait about 2 minutes for it to boot up and establish an ADSL signal. Load Internet Explorer.
Type the following in the address bar: 192.168.1.254
When prompted for a username and password, type:
Username: admin
Password: admin
Click on Configuration on the left hand side, click on LAN and then click on
Wireless.
Ensure the wireless details are entered as follows and click on Apply.
To secure your wireless connection, click on Wireless Security on the left hand
side.
Enter the details as follows and click on Apply.
After the settings have been applied, be sure to press the "Save Config" button.
Note You can enter any password you like in the "Pre-Shared Key" section. Please ensure you
write it down as if you forget it you will need to reset it inside your router (we cannot see this
password).
