 | support home  voip voip guides current page |
Download the X-Lite 3.0 setup file from one of the following links depending on your operating system type:
Take note of where you saved the file, then double click on the X-Lite setup file on your computer
Click Next on the first screen.
Click �I accept the agreement� and click on Next.
Click on Next on the next screen.
Set the settings as follows and click on Next.
The program will install, please wait. Once its done, click on 'Finish'
Click on No on the next screen.
The next screen will pop up, click on Add.
Enter the settings as follows:
Display name: VoIP username
Username: VoIP username
Password: VoIP password
Authorization user name: VoIP username
Domain: voip.spin.net.au
Note
Click on Apply, then click on OK. On the next window, click Close
You should see a similar screen to the one below, if so you have been successful.
To test the service, dial a number with the keypad on the main screen. Then click on the Green telephone on the left hand side to dial. You will hear it dial and the call should be successful. To hang up, click on the Red telephone on the right hand side.
You have successfully installed X-Lite 3.0.
